904J-E28TA

Industrial Diesel Engines 904J-E28TA

Key Specs

Maximum Power
74 hp
55 kW
Maximum Torque
280 lb-ft @ 1360 rpm
380 Nm @ 1360 rpm
Emissions
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4

Tools And Expert Help At Every Turn

Overview

The 904 Series engines offer a compact power solution for off-highway applications in construction, agriculture and industrial.

For our customers these compact, 4 cylinder engines provide excellent performance in power, peak and low speed torque, fuel consumption and transient response.

Reliability and easy service access are integral to the design of the engines. It is available with a range of installation options to enable OEMs to minimise the size of the engine bay of their machines.

Media Gallery

904J-E28TA Industrial Diesel Engine

Features At A Glance

Perkins

A lifetime of low cost

The fuel consumption is optimised to match the operating cycles of a wide range of off-highway applications. No additional fluids or additives are required which lowers operating costs and operator training.

 

Hydraulic tappets, multi-vee belts and 500 hour service intervals enable low cost maintenance.
Perkins

Dependable power

The engine has been designed using the latest predictive engineering methods, combined with an extensive field validation program to ensure reliable power in the toughest off-highway conditions.

 

Quality, reliability and consistency are assured. Our facilities worldwide employ the same efficient processes, the same tested and validated components, and the same stringent quality controls wherever your engines are manufactured.
Perkins

Industry leading flexibility

A modular engine concept allows OEMs to design one engine installation for many different regions. This reduces cost and development time for cooling pack, mounting, hydraulic and control interfaces.
Specifications Standard Equipment

Product Specifications for 904J-E28TA

Download Print
Maximum Power 74 hp 55 kW
Maximum Torque 280 lb-ft @ 1360 rpm 380 Nm @ 1360 rpm
Rated Speed 2400 rpm 2400 rpm
Minimum Power 74 hp 55 kW
Emissions EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4 EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
Number of Cylinders 4 inline 4 inline
Cycle 4 stroke 4 stroke
Bore 3.5 in 90 mm
Stroke 4.3 in 110 mm
Displacement 171 in³ 2.8 l
Compression Ratio 17.0:1 17.0:1
Aspiration Turbocharged aftercooled Turbocharged aftercooled
Combustion System Direct injection Direct injection
Rotation from Flywheel End Anti-clockwise Anti-clockwise
Aftertreatment DOC+DPF DOC+DPF
Cooling System Liquid Liquid
Length 24.9 in 633 mm
Width 21.4 in 543 mm
Height 30.9 in 786 mm
Dry Weight 750 lb 340 kg
Note 1 *Final dimensions dependent on selected options *Final dimensions dependent on selected options

904J-E28TA Standard Equipment

Print

Electrical and Electronics

  • 12V system
  • Data interface via CANbus J1939
  • Full electronic control
  • Glow plugs for best cold starting with minimum battery impact
  • High power alternator and starter motor options
  • Sensors and robust wiring harness included

Flywheel and Flywheel Housing

  • SAE3 or SAE4 flywheel housing
  • Wide choice of interfaces for common transmissions and hydraulic pumps

Fuel System

  • Electronic high pressure common rail
  • Fuel filter - chassis mounted
  • Water sensor included - early warning for operator

General

  • Cold-start capable with standard equipment to -25°C
  • Supplied painted or lacquered

Oil System

  • Oil filters. Mounting options available on either side of the engine, plus remote
  • Dipsticks. Choice of position and length
  • Oil fillers. Multiple locations on engine to allow for choice of service access
  • High incline sump. 35° continuous in all directions. Suitable for machines that are used on steep slopes

Power Take-Off (PTO)

  • SAE-A and SAE-B interfaces available

Aftertreatment Equipment

  • Aftertreatment mounted on engine as standard, remote available

See how 904J-E28TA compares against frequently compared products.

Industrial
Selected
904J-E28TA
904J-E28TA
Maximum Power
74 hp
55 kW
Maximum Torque
280 lb-ft @ 1360 rpm
380 Nm @ 1360 rpm
Emissions
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
Industrial
904J-E28T
904J-E28T
Maximum Power
74 hp
55 kW
Maximum Torque
221 lb-ft @ 1600 rpm
300 Nm @ 1600 rpm
Emissions
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
EU Stage V, U.S. EPA & CARB Tier 4 Final, Japan MLIT Step 4
View Details
Industrial
904D-E28T
904D-E28T
Maximum Power
74 hp
55 kW
Maximum Torque
221 lb-ft @ 1600 rpm
300 Nm @ 1600 rpm
Emissions
UN ECE R96 Stage IIIA, Brazil MAR-1
UN ECE R96 Stage IIIA, Brazil MAR-1
View Details

Use the comparison tool to compare detailed specs of Perkins and competitor models.

Compare All Models

Check out current offers for the 904J-E28TA

View More Offers